|Products Name||Auto-Stamp Motorized Meso Machine|
|Material||Stainless Steel & Plastic|
|Adapter||5V, 1000 mA|
|Weight||Main body 71g|
|Needle Size||Nano, 1, 3, 5, 7, 9, 12, 36, 42 needles|
|Shipping||EMS / DHL / Fexdex / UPS / Express|
|Payment Term||TT or Paypal or Western Union Full Payment Before Shipment|
|Delivery Day||about 3 to 7 working days after received your payment|
|Standard Packing List||Host||1 pcs|
|Cartridges||2 pcs 12 pins|
How to Operate
1. Setting--Adapter Mode
(1) Plug in DC adaptor to the jack.
(2) Plug in DC adaptor to AC outlet
(1) Take out needle cartridge in the sterilized packing.
(2) Fitting round slots 1 into 2 of machine, push needle cartridge horizontally up to the end.
(3) Lock the cartridge by turning it to the counter clockwise.
(4) Adjustment of needle length should be done after turn on the machine.
(5) If you want to remove the needle cartridge, turn it to the clockwise and push out horizontally, fitting round slots together.
3. Adjustment of speed and needle length
(1) Adjustment of speed and ON / OFF
(2) 5 speed level control
Pressing the switch 2 seconds to open the power firstly. The speed cycles low to high. Please press the switch 2 seconds when you need to stop the device.
The flicker frequence of light faster, the speed is higher.
(3)Adjustment of needle length
You can adjust the length of needle by turning the adjustment ring clockwise or counter clockwise. Turning it clockwise, length of it wil be longer. Turning it counter clokwise, length of it will be shorter.